Fitness

Instant, private, and free

Steps to Calories Calculator.

Estimate the calories burned walking a given number of steps, using your body weight, stride and walking pace.

On-device calculationNo signup
01

Set your values

Results update as you type.

Required — calories scale directly with body weight.

Walking pace

Selected pace: 5 km/h, MET 3.5

Used to estimate stride as height x 0.415.

Overrides the height-based estimate.

Calories burned: 346 kcal

Calories burned

346kcal

Breakdown

Distance walked7.05 km / 4.38 mi
Time on your feet1h 25m
MET used3.5
Assumed speed5 km/h

How to Use

Calories = MET x body weight in kg x hours walked. Your steps become a distance via your stride, and the pace you pick sets both the speed and the MET value.

Body weight is required. A steps-only calorie figure is not defensible: a 55 kg walker and a 100 kg walker burn very different amounts over the same 10,000 steps.

MET values used: 2.0 for a slow stroll (about 3.2 km/h), 3.5 for a moderate walk (5 km/h) and 5.0 for a brisk walk (6.4 km/h).

This is gross energy expenditure — it includes the calories you would have burned at rest during that time, which is how fitness trackers usually report it.

FAQs

How many calories does 10,000 steps burn?

For a 70 kg (154 lb) adult walking at a moderate 5 km/h with an average stride, roughly 250-300 kcal. A 100 kg walker doing the same 10,000 steps burns closer to 400 kcal. Body weight is the single biggest factor, which is why this calculator requires it.

Why do I have to enter my weight?

Calorie burn is proportional to body mass: the formula is MET x weight in kg x hours. A steps-only estimate silently assumes an average weight and can be off by 40% or more for lighter or heavier people, so we do not offer one.

What is a MET and which values do you use?

A MET (metabolic equivalent of task) expresses how hard an activity is relative to sitting still. We use the Compendium of Physical Activities values for walking: 2.0 for a slow stroll (~3.2 km/h), 3.5 for a moderate walk (~5 km/h) and 5.0 for a brisk walk (~6.4 km/h).

Does this include the calories I would burn anyway?

Yes. The MET formula gives gross energy expenditure, which includes your resting metabolism during the walk. That is how fitness trackers and most fitness apps report it. To get net calories burned above resting, subtract roughly 1 MET's worth of the same duration.

Does walking uphill or carrying weight change the result?

Yes, significantly. Walking up a moderate incline can raise the MET from 3.5 to 6 or higher, and carrying a heavy pack adds more. This calculator assumes level ground, so treat the number as a floor for hilly routes.

Cite this calculator

Canonical URL: https://mathify.one/ru/fitness/steps-calories

Cite as: Mathify. (2026). Калькулятор шагов в калории. https://mathify.one/ru/fitness/steps-calories

Use Cases

Track daily walking burn

Use your fitness tracker's step count to estimate how many calories you burn from walking each day, helping you manage energy balance.

Example: Enter 10,000 steps, 70 kg, 175 cm, and see estimated calories burned.

Plan walking workouts

Set step goals for weight management or fitness by estimating the calorie cost of different step counts and paces.

Example: Compare 5,000 vs. 12,000 steps to see the difference in calories.

Frequently Asked Questions

How does the Steps to Calories Calculator estimate calories burned?
It uses your step count, body weight, height, and optional measured stride to estimate distance walked. Then, based on your walking pace (assumed from typical step rates), it applies standard MET (Metabolic Equivalent of Task) values to calculate calories burned. The calculator shows the working so you can see each step.
What is a MET value and how is it used?
MET (Metabolic Equivalent of Task) is a unit that estimates the energy cost of physical activities. For walking, MET values vary by pace: e.g., 3.5 METs for brisk walking. The calculator multiplies your body weight (in kg) by the MET value and duration to estimate calories burned.
Do I need to enter my measured stride length?
No, it's optional. If you don't provide it, the calculator estimates stride length from your height using a standard formula (stride ≈ 0.415 × height). For more accuracy, you can measure your stride by walking a known distance and dividing by steps taken.

Tips & Common Mistakes

Tips

  • For best accuracy, enter your body weight in the unit you know (kg or lbs) and your height in cm. The calculator converts as needed.
  • If you know your actual stride length, enter it. Otherwise, the calculator estimates it from height, which is a good approximation.
  • Walking pace affects calories burned. The calculator assumes a typical walking pace; for faster or slower walking, results may vary.
  • Use the 'working' display to understand how the calculation is done, which can help you adjust inputs for different scenarios.

Common Mistakes to Avoid

  • Entering steps in thousands without the comma (e.g., 10000 instead of 10,000) – the calculator expects the full number.
  • Forgetting to select the correct weight unit (kg or lbs) – this can drastically change the result.
  • Assuming the result is exact – it's an estimate based on averages and standard MET values, so actual burn may differ.

Last updated: August 13, 2026