单位转换
即时、私密且免费
计算器: Picas to Millimeters Converter.
使用计算器: Picas to Millimeters Converter，根据输入获得清晰实用的结果。
此计算器尚未完全翻译——部分文本以英文显示。
设备端计算无需注册
01
输入数值
输入时结果会更新。
02 / 答案
Millimeters: 4.233333333333
One PostScript pica is 12 PostScript points (4.233333… mm).
相关计算器
PostScript Points to Millimeters ConverterConvert PostScript typography points to millimeters.Millimeters of Mercury to Atmospheres ConverterConvert mmHg to standard atmospheres using 760 mmHg = 1 atm.Millimeters of Mercury to Pascals ConverterConvert millimeters of mercury to pascals using the standard mmHg definition.Density Converter ConverterConvert density converter with explicit units and user-entered reference factors where required.Energy Conversion ConverterConvert energy conversion with explicit units and user-entered reference factors where required.Force Conversion ConverterConvert force conversion with explicit units and user-entered reference factors where required.
Cite this calculator
Canonical URL: https://mathify.one/zh/conversion/picas-to-millimeters
Cite as: Mathify. (n.d.). 计算器: Picas to Millimeters Converter. https://mathify.one/zh/conversion/picas-to-millimeters
Use Cases
Page Layout Design
Convert pica-based measurements from design software to millimeters for print production or when communicating with printers.
Example: Convert a 12-pica margin to millimeters: 12 × 4.2333 = 50.8 mm.
Prepress and Print Specification
Ensure accurate physical dimensions when setting up print files or verifying layout specifications in millimeters.
Example: Check that a 6-pica column width equals 25.4 mm.
Frequently Asked Questions
- How many millimeters are in one PostScript pica?
- One PostScript pica is exactly 4.2333 millimeters. This is based on the standard that 1 pica = 1/6 inch and 1 inch = 25.4 mm, so 25.4/6 = 4.2333 mm.
- What is the difference between a PostScript pica and a traditional pica?
- A PostScript pica is exactly 1/6 inch (4.2333 mm), used in digital page layout. Traditional picas (like in typography) may vary slightly, but PostScript picas are the standard in modern software like Adobe InDesign.
- Can I use this converter for print design measurements?
- Yes, this converter is ideal for print design. It helps you convert pica-based measurements (common in layout software) to millimeters, which are often used in print specifications and physical measurements.
Tips & Common Mistakes
Tips
- Remember that 1 pica = 4.2333 mm, so multiply the number of picas by 4.2333 to get millimeters.
- For quick estimates, you can round to 4.23 mm per pica, but for precise print work use the exact value.
- Double-check your input: ensure you are entering picas, not points (1 pica = 12 points).
- Use this converter when switching between software that uses picas and specifications that require millimeters.
Common Mistakes to Avoid
- Confusing picas with points: 1 pica = 12 points, so entering points as picas will give incorrect results.
- Using a rounded conversion factor like 4.2 mm instead of the exact 4.2333 mm, which can cause small errors in precise layouts.
- Forgetting that this converter is for PostScript picas, not traditional typographic picas that may have slightly different values.
Last updated: August 13, 2026