Skip to content
Mathify
Esta calculadora se muestra actualmente en inglés mientras se prepara su traducción.

Fisica

Calculadora verificada con fórmula transparente

Fisica

Cylindrical Tank Volume Calculator.

Calculates the volume of a cylindrical tank in liters and cubic meters based on diameter and height.

Los resultados se actualizan en vivo mientras escribes.
ƒ

Tus entradas

Cómo funciona

  1. 1

    Measure the diameter of the tank in meters.

  2. 2

    Measure the height of the tank in meters.

  3. 3

    Divide the diameter by 2 to get the radius.

  4. 4

    Calculate volume using π × radius² × height.

pi * (diameter/2)^2 * height

Preguntas frecuentes

How do I convert the volume to liters?

Multiply the volume in cubic meters by 1000 to get liters.

What if my tank is partially filled?

Use the liquid height instead of the full height to get the volume of liquid.

Can I use this for horizontal tanks?

No, this formula assumes a vertical cylinder. Horizontal tanks require a different calculation.

Explorar esta categoría de calculadoras

FisicaExplorar todo

Resultados

Fórmula verificada

Volume

9,425m³

Volume in liters9425L
Pregunta lo que sea

Estimación solo como guía general: verifica decisiones importantes con un profesional adecuado.

Cómo funciona

Calculates the volume of a cylindrical tank in liters and cubic meters based on diameter and height.

  1. Measure the diameter of the tank in meters.
  2. Measure the height of the tank in meters.
  3. Divide the diameter by 2 to get the radius.
  4. Calculate volume using π × radius² × height.

Fórmulas

Las matemáticas detrás de esta calculadora, escritas para que puedas verificar el resultado.

Cylinder volume

V = π × r² × h

The volume of a cylinder is the area of its circular base (πr²) times its height.

Example:

Input: r = 1 m, h = 3 m

Calculation: π × 1² × 3

Result: ≈ 9.42 m³

Casos de uso reales

Dónde aparece este cálculo en la vida cotidiana.

Water storage

Determine how much water a cylindrical tank can hold for residential or agricultural use.

Example: A 2 m diameter, 3 m tall tank holds about 9,425 liters.

Fuel tanks

Estimate fuel capacity for cylindrical storage tanks in industrial settings.

Example: A 4 m diameter, 5 m tall tank holds about 62,832 liters.

Aquarium sizing

Calculate the water volume for cylindrical aquariums to plan filtration and stocking.

Example: A 1 m diameter, 1 m tall tank holds about 785 liters.

Consejos y errores comunes

Tips

  • Always measure the internal dimensions for accurate volume.
  • Use consistent units (meters) to get cubic meters directly.
  • For partially filled tanks, measure the liquid depth and use that as the height.
  • Remember that 1 cubic meter equals 1000 liters.

Common Mistakes to Avoid

  • Using diameter instead of radius in the formula.
  • Forgetting to convert measurements to the same unit.
  • Assuming the tank is perfectly cylindrical when it may have rounded ends.

Supuestos y limitaciones

  • Use the stated inputs and units.
  • Results are estimates for planning and education.
  • Check measurements and source data before making an important decision.