Conversions

Instant, private, and free

RPM to Hertz Converter.

Convert revolutions per minute to hertz.

On-device calculationNo signup
01

Set your values

Results update as you type.

Hertz (Hz): 0.016666666667

Hertz (Hz)

0.000000000000

1 Hz is one cycle per second, so Hz = rpm ÷ 60.

FAQs

How does the rpm to hertz converter work?

Convert revolutions per minute to hertz.

Use Cases

Motor and Machinery Speed Analysis

Determine the frequency of rotating equipment like motors, fans, or turbines from their RPM rating, useful for vibration analysis and maintenance scheduling.

Example: A motor running at 1800 RPM operates at 30 Hz.

Audio and Signal Processing

Convert rotational speeds of devices like hard drives or turntables into frequency for audio engineering or signal analysis.

Example: A turntable spinning at 33⅓ RPM produces a frequency of approximately 0.556 Hz.

Frequently Asked Questions

How do I convert RPM to hertz?
To convert RPM to hertz, divide the RPM value by 60, because there are 60 seconds in a minute. For example, 120 RPM divided by 60 equals 2 Hz. Our converter does this calculation automatically for you.
What is the formula for RPM to Hz?
The formula is: frequency (Hz) = RPM / 60. This is because one revolution per minute is equivalent to one sixtieth of a revolution per second, and hertz measures cycles per second.
Can I convert Hz back to RPM?
Yes, to convert hertz back to RPM, multiply the hertz value by 60. For instance, 5 Hz multiplied by 60 equals 300 RPM. Our converter focuses on RPM to Hz, but you can easily reverse the calculation.

Tips & Common Mistakes

Tips

  • Remember that 1 RPM equals 1/60 Hz, so dividing by 60 is the key conversion.
  • For quick mental estimates, divide the RPM by 60 to get the approximate hertz value.
  • Use this converter for any rotational speed value, whether it's a small motor or a large industrial turbine.
  • Double-check your input value to ensure it's in revolutions per minute, not per second or per hour.

Common Mistakes to Avoid

  • Forgetting to divide by 60 and instead using a 1:1 conversion, which would be incorrect.
  • Confusing RPM with revolutions per second (RPS); if you have RPS, multiply by 60 to get RPM first.
  • Using the converter for non-rotational frequencies, as it is specifically designed for RPM to Hz conversion.

Last updated: August 13, 2026