Conversions

Instant, private, and free

BTU per Hour to Watts Converter.

Convert International Table BTU per hour to watts.

On-device calculationNo signup
01

Set your values

Results update as you type.

Watts (W): 0.293071111111

Watts (W)

0.000000000000

Uses 1 Btu = 1,055.056 J and 3,600 seconds per hour, so 1 Btu/h = 0.2930711111 W.

FAQs

How does the btu per hour to watts converter work?

Convert International Table BTU per hour to watts.

Use Cases

HVAC System Sizing

When selecting an air conditioner or heater, compare its BTU/hr rating to the wattage required for your space or electrical capacity.

Example: A 12,000 BTU/hr AC unit converts to about 3,517 watts.

Energy Consumption Analysis

Convert BTU/hr ratings to watts to estimate electricity usage and costs for heating or cooling equipment.

Example: Convert a 5,000 BTU/hr heater to watts to calculate its hourly energy cost.

Frequently Asked Questions

How do I convert BTU per hour to watts?
To convert BTU per hour (International Table) to watts, multiply the BTU/hr value by 0.29307107. For example, 10,000 BTU/hr equals approximately 2,930.71 watts. This converter does the calculation for you instantly.
What is the difference between BTU/hr and watts?
BTU per hour (British Thermal Units per hour) and watts are both units of power. One watt is equal to 3.412142 BTU/hr. BTU/hr is commonly used in heating and cooling systems, while watts are the standard SI unit for power.
Why is it important to convert BTU/hr to watts?
Converting BTU/hr to watts helps compare equipment from different regions or standards. It ensures you understand the actual power consumption or output of a heating or cooling system, which is essential for sizing, energy efficiency, and cost calculations.

Tips & Common Mistakes

Tips

  • Use the International Table (IT) BTU definition for standard conversions; other definitions (like thermochemical) may differ slightly.
  • Remember that 1 watt equals approximately 3.412 BTU/hr, so you can also divide watts by 3.412 to get BTU/hr.
  • For quick estimates, you can round the conversion factor to 0.293, but for precise engineering calculations, use the exact value 0.29307107.
  • Always double-check your input value for BTU/hr to avoid errors in the converted wattage.

Common Mistakes to Avoid

  • Using the wrong conversion factor: Some sources use 0.293, but the exact factor for International Table BTU is 0.29307107.
  • Confusing BTU per hour with BTU (energy) – this converter is for power (rate), not total energy.
  • Forgetting to specify the BTU type – this converter uses the International Table (IT) definition, which is standard for most applications.

Last updated: August 13, 2026