Construction

Instant, private, and free

Roof Pitch Calculator.

Calculate roof pitch, angle, rise, or run from any two compatible measurements.

On-device calculationNo signup
01

Set your values

Results update as you type.

pitchPercent: 200

pitchPercent

0.00
angleDegrees: 63.43

angleDegrees

0.00
slopeFactor: 2.24

slopeFactor

0.00

Outputs use your entered dimensions and an explicit waste percentage; no material density is inferred.

FAQs

What does a 6:12 roof pitch mean?

It means the roof rises 6 units for every 12 horizontal units of run. Keep the units consistent for a meaningful ratio.

Use Cases

Roofing Material Estimation

Determine the pitch and angle to estimate the amount of roofing materials needed for a project, ensuring accurate cuts and coverage.

Example: Input rise of 6 ft and run of 12 ft to get a pitch of 6/12 and a 26.57° angle.

Architectural Design and Planning

Use the calculator to verify roof slopes during design, ensuring they meet local building codes and aesthetic preferences.

Example: Check if a 4/12 pitch matches the desired angle for a residential design.

Frequently Asked Questions

How do I use the Roof Pitch Calculator?
Enter any two compatible measurements (e.g., rise and run, or pitch and angle) and the calculator will compute the remaining values. Ensure units are consistent for accurate results.
What units does the calculator support?
The calculator accepts measurements in common units like inches, feet, or metric. You can mix units as long as you specify them correctly, but it's best to use the same unit for both inputs.
Can I calculate roof pitch from angle only?
Yes, if you provide the angle and one other measurement (like run or rise), the calculator can determine the pitch. If you only have the angle, you'll need at least one linear dimension to get a complete result.

Tips & Common Mistakes

Tips

  • Always measure rise and run from the same reference point to avoid errors.
  • Use consistent units (e.g., all inches or all feet) for both inputs to get accurate results.
  • Double-check your measurements, especially on steep roofs, to ensure safety and precision.
  • Remember that pitch is typically expressed as a ratio (e.g., 6/12) and angle in degrees.

Common Mistakes to Avoid

  • Mixing units without converting (e.g., using feet for rise and inches for run) can lead to incorrect calculations.
  • Entering the rise and run in the wrong order, which swaps the pitch ratio and angle.
  • Assuming the calculator provides professional advice; it's a reference tool and should be verified by a qualified contractor.

Last updated: August 13, 2026