物理
已验证计算器，公式透明
Conductor Resistance vs Temperature.
Calculates the resistance of a conductor at a target temperature given its resistance at a reference temperature and the temperature coefficient of resistance.
您的输入
工作原理
- 1
Enter the resistance at the reference temperature.
- 2
Enter the reference temperature and the target temperature.
- 3
Enter the temperature coefficient of resistance for the material.
- 4
The calculator applies the linear formula to find the resistance at the target temperature.
r_ref * (1 + alpha * (t_target - t_ref))常见问题
What is the temperature coefficient of resistance?
It is a material property that indicates how much the resistance changes per degree Celsius change in temperature. For metals like copper, it is positive, meaning resistance increases with temperature.
Is this formula accurate for all temperature ranges?
The linear approximation works well for moderate temperature changes. For very large temperature swings, the relationship becomes nonlinear, and more complex models may be needed.
What if the target temperature is lower than the reference?
The formula still works; the resistance will decrease if the temperature coefficient is positive. For example, cooling a copper conductor reduces its resistance.
结果
公式已检查估算仅供参考——重要决策请咨询专业人士。
工作原理
Calculates the resistance of a conductor at a target temperature given its resistance at a reference temperature and the temperature coefficient of resistance.
- Enter the resistance at the reference temperature.
- Enter the reference temperature and the target temperature.
- Enter the temperature coefficient of resistance for the material.
- The calculator applies the linear formula to find the resistance at the target temperature.
公式
此计算器背后的数学公式，供您核对结果。
Linear resistance-temperature relation
R(T) is the resistance at temperature T, R₀ is the resistance at reference temperature T₀, and α is the temperature coefficient of resistance.
Example:
Input: R₀ = 10 Ω, T₀ = 20°C, T = 75°C, α = 0.00393 /°C
Calculation: 10 × (1 + 0.00393 × (75 - 20))
Result: ≈ 12.16 Ω
实际应用场景
此计算在日常生活中的应用。
Electrical engineering design
Predict how wire resistance changes with operating temperature to ensure circuits function correctly.
Example: Designing a power cable that will operate at 75°C.
Temperature sensing
Resistance temperature detectors (RTDs) use this principle to measure temperature.
Example: A platinum RTD with known α.
Safety analysis
Estimate resistance increase in conductors under load to assess overheating risks.
Example: Checking if a wire's resistance at high current could cause excessive voltage drop.
提示与常见错误
Tips
- Use the material's specific α value; common values: copper 0.00393, aluminum 0.00403, iron 0.005.
- Ensure the reference temperature matches the conditions under which R₀ was measured.
- For precision, consider that α itself can vary slightly with temperature.
- This linear model is valid for a limited range; for extreme temperatures, use more advanced models.
Common Mistakes to Avoid
- Using α as a percentage instead of a decimal (e.g., 0.5 instead of 0.005).
- Forgetting to convert temperature differences to the same unit (always use °C or K consistently).
- Assuming the formula works for superconductors or materials with negative α without checking.
假设与限制
- Use the stated inputs and units.
- Results are estimates for planning and education.
- Check measurements and source data before making an important decision.