Skip to content
Mathify
此计算器目前以英文显示，翻译正在准备中。

建筑

已验证计算器，公式透明

建筑

Concrete Pile Calculator.

Estimates the volume of concrete needed for a cylindrical pile based on diameter and length.

结果随输入实时更新。
ƒ

您的输入

工作原理

  1. 1

    Measure the pile diameter and length in meters.

  2. 2

    Divide the diameter by 2 to get the radius.

  3. 3

    Square the radius and multiply by pi (3.14159).

  4. 4

    Multiply by the length to get the volume in cubic meters.

pi * (diameter/2)^2 * length

常见问题

Does this calculator account for pile taper or reinforcement?

No, it assumes a perfectly cylindrical pile with no taper and does not include the volume of steel reinforcement.

Should I add extra concrete for waste or over-excavation?

Yes, it's common to add 5-10% extra to cover spillage, uneven ground, or over-excavation.

Can I use this for square piles?

No, this is only for cylindrical piles. For square piles, use length × width × depth.

浏览此计算器类别

建筑浏览全部

结果

公式已检查

Concrete Volume

2.827m³

询问任何问题

估算仅供参考——重要决策请咨询专业人士。

工作原理

Estimates the volume of concrete needed for a cylindrical pile based on diameter and length.

  1. Measure the pile diameter and length in meters.
  2. Divide the diameter by 2 to get the radius.
  3. Square the radius and multiply by pi (3.14159).
  4. Multiply by the length to get the volume in cubic meters.

公式

此计算器背后的数学公式，供您核对结果。

Cylinder Volume

V = π × (d/2)² × L

The volume of a cylinder is the cross-sectional area (πr²) times the height (length).

Example:

Input: d = 0.6 m, L = 10 m

Calculation: π × (0.3)² × 10

Result: ≈ 2.83 m³

实际应用场景

此计算在日常生活中的应用。

Ordering Concrete

Determine the amount of ready-mix concrete to order for a pile foundation.

Example: A 0.6 m diameter, 12 m long pile needs about 3.39 m³.

Cost Estimation

Multiply the volume by the unit price of concrete to estimate material cost.

Example: If concrete costs $150/m³, a 4 m³ pile costs $600.

Project Planning

Compare different pile sizes to find the most economical option for your load requirements.

提示与常见错误

Tips

  • Always measure the actual pile dimensions on site, not just the design values.
  • Add 5-10% extra concrete to account for waste and over-excavation.
  • For multiple piles, multiply the single-pile volume by the number of piles.
  • Check with your engineer for any additional concrete requirements like pile caps.

Common Mistakes to Avoid

  • Using the diameter instead of the radius in the area formula.
  • Forgetting to convert units (e.g., using cm instead of m).
  • Not adding extra concrete for waste or uneven ground.

假设与限制

  • Use the stated inputs and units.
  • Results are estimates for planning and education.
  • Check measurements and source data before making an important decision.