This calculator is currently shown in English while its translation is being prepared.

Construction

Verified calculator with a transparent formula

Construction

Concrete Curb Calculator.

Estimates the volume of concrete needed for a straight curb based on length, width, and height.

Results update live as you type.
ƒ

Your inputs

How it works

  1. 1

    Convert width and height from inches to feet by dividing by 12.

  2. 2

    Multiply length by converted width and height.

  3. 3

    The result is the volume in cubic feet.

length * (width / 12) * (height / 12)

Frequently asked questions

How do I convert cubic feet to cubic yards?

Divide the cubic feet by 27, since 1 cubic yard = 27 cubic feet.

Should I add extra concrete for waste?

It's common to add 5-10% extra to account for spillage and uneven surfaces.

Explore this calculator category

ConstructionBrowse all

Results

Formula checked

Concrete Volume

2.5cu ft

Ask Anything

Estimate for general guidance only — verify important decisions with an appropriate professional.

How it works

Estimates the volume of concrete needed for a straight curb based on length, width, and height.

  1. Convert width and height from inches to feet by dividing by 12.
  2. Multiply length by converted width and height.
  3. The result is the volume in cubic feet.

Formulas

The math behind this calculator, written out so you can verify the result.

Volume of a rectangular prism

V = L × W × H

Multiply length, width, and height (all in feet) to get volume in cubic feet.

Example:

Input: L=10 ft, W=0.5 ft, H=0.5 ft

Calculation: 10 × 0.5 × 0.5

Result: 2.5 cu ft

Real-world use cases

Where this calculation shows up in everyday life.

Estimating material for a curb

Quickly determine how much concrete to order for a straight curb section.

Example: A 10 ft curb with 6x6 inch cross-section needs 2.5 cu ft.

Budgeting for a landscaping project

Calculate concrete volume to estimate cost before starting work.

Example: Compare different curb dimensions to see cost impact.

Tips and common mistakes

Tips

  • Measure in inches and convert to feet for accuracy.
  • Add 5-10% extra for waste and spillage.
  • Use consistent units throughout the calculation.

Common Mistakes to Avoid

  • Forgetting to convert inches to feet.
  • Using width and height in inches without dividing by 12.
  • Not accounting for waste when ordering concrete.

Assumptions and limitations

  • Use the stated inputs and units.
  • Results are estimates for planning and education.
  • Check measurements and source data before making an important decision.