This calculator is currently shown in English while its translation is being prepared.

Construction

Verified calculator with a transparent formula

Construction

Concrete Column Footing Calculator.

Estimates the volume of concrete needed for a square column footing and the total weight of concrete required.

Results update live as you type.
ƒ

Your inputs

How it works

  1. 1

    Measure the length, width, and thickness of the footing in feet.

  2. 2

    Multiply length by width to get the footprint area in square feet.

  3. 3

    Multiply the area by the thickness to get the volume in cubic feet.

  4. 4

    Optionally, multiply the volume by 150 lb/ft³ to estimate the concrete weight.

footing_length * footing_width * footing_thickness

Frequently asked questions

How do I convert cubic feet to cubic yards?

Divide the volume in cubic feet by 27, since 1 cubic yard equals 27 cubic feet.

What is the typical density of concrete used for weight estimates?

Standard concrete weighs about 150 pounds per cubic foot, but this can vary with mix and reinforcement.

Should I add extra concrete for waste?

It's common to add 5-10% extra to account for spillage, uneven excavation, or slight over-excavation.

Explore this calculator category

ConstructionBrowse all

Results

Formula checked

Concrete Volume

9cu ft

Concrete Weight1,350lbs
Ask Anything

Estimate for general guidance only — verify important decisions with an appropriate professional.

How it works

Estimates the volume of concrete needed for a square column footing and the total weight of concrete required.

  1. Measure the length, width, and thickness of the footing in feet.
  2. Multiply length by width to get the footprint area in square feet.
  3. Multiply the area by the thickness to get the volume in cubic feet.
  4. Optionally, multiply the volume by 150 lb/ft³ to estimate the concrete weight.

Formulas

The math behind this calculator, written out so you can verify the result.

Volume of a rectangular prism

V = L × W × T

The volume of concrete is the product of the footing's length, width, and thickness.

Example:

Input: L = 3 ft, W = 3 ft, T = 1 ft

Calculation: 3 × 3 × 1 = 9

Result: 9 cubic feet

Weight of concrete

Weight = V × 150 lb/ft³

Multiply the volume by the density of concrete to estimate the total weight.

Example:

Input: V = 9 ft³

Calculation: 9 × 150 = 1350

Result: 1350 pounds

Real-world use cases

Where this calculation shows up in everyday life.

Material estimation

Determine how much concrete to order for a column footing before pouring.

Example: A 3x3x1 ft footing needs 9 cubic feet of concrete.

Cost planning

Estimate the weight to calculate delivery costs or structural load.

Example: A 9 ft³ footing weighs about 1350 lbs.

Comparing footing sizes

Quickly compare different footing dimensions to see how volume changes.

Example: Increasing thickness from 1 ft to 1.5 ft adds 4.5 ft³ for a 3x3 ft footing.

Tips and common mistakes

Tips

  • Measure in feet and inches converted to decimal feet for accuracy.
  • Always order a little extra concrete (5-10%) to avoid running short.
  • Check local building codes for minimum footing dimensions.
  • Use the weight estimate to ensure the soil can support the load.

Common Mistakes to Avoid

  • Forgetting to convert inches to feet (e.g., 6 inches = 0.5 ft).
  • Using the column size instead of the footing size.
  • Not accounting for the thickness of gravel or leveling layer.

Assumptions and limitations

  • Use the stated inputs and units.
  • Results are estimates for planning and education.
  • Check measurements and source data before making an important decision.