Профессиональные
Проверенный калькулятор с прозрачной формулой
Concrete Volume Calculator.
Calculates the volume of concrete needed for a slab, footing, or column based on dimensions and number of units.
Ваши данные
Как это работает
- 1
Convert depth from inches to feet by dividing by 12.
- 2
Multiply length by width to get the area in square feet.
- 3
Multiply the area by the depth in feet to get volume per unit.
- 4
Multiply by the number of units to get total volume.
length * width * (depth / 12) * unitsЧасто задаваемые вопросы
How do I account for waste or overage?
Add 5-10% to the total volume to cover spillage, uneven subgrades, or slight over-excavation.
Can I use this for round columns?
No, this calculator is for rectangular or square shapes. For round columns, use the formula π × radius² × height.
What if my dimensions are in meters?
Convert meters to feet first (1 m = 3.28084 ft) or use the cubic meters result after entering feet.
Изучить эту категорию калькуляторов
Результаты
Формула проверенаTotal Concrete Volume
33,333ft³
Оценка только для общего руководства — проверяйте важные решения с соответствующим специалистом.
Как это работает
Calculates the volume of concrete needed for a slab, footing, or column based on dimensions and number of units.
- Convert depth from inches to feet by dividing by 12.
- Multiply length by width to get the area in square feet.
- Multiply the area by the depth in feet to get volume per unit.
- Multiply by the number of units to get total volume.
Формулы
Математика, лежащая в основе этого калькулятора, изложена так, чтобы вы могли проверить результат.
Rectangular Volume
Multiply length, width, and height (all in the same units) to get the volume.
Example:
Input: L=10 ft, W=10 ft, H=4 in (0.333 ft)
Calculation: 10 × 10 × 0.333
Result: 33.3 ft³
Примеры из реальной жизни
Где этот расчет встречается в повседневной жизни.
Slab Foundation
Determine concrete needed for a house slab or patio.
Example: 20 ft × 30 ft slab, 4 in thick
Footings
Calculate concrete for continuous footings under walls.
Example: 40 ft long, 1 ft wide, 1 ft deep
Multiple Piers
Estimate concrete for several identical piers or posts.
Example: 10 piers, each 1 ft × 1 ft × 3 ft
Советы и частые ошибки
Tips
- Always measure in the same unit system to avoid errors.
- Order a little extra concrete (5-10%) to avoid running short.
- Check with your supplier for minimum order quantities.
- Use the cubic yards result when ordering from a ready-mix company.
Common Mistakes to Avoid
- Forgetting to convert inches to feet before multiplying.
- Not multiplying by the number of identical units.
- Using outside dimensions when inside dimensions are needed.
Допущения и ограничения
- Use the stated inputs and units.
- Results are estimates for planning and education.
- Check measurements and source data before making an important decision.