Skip to content
Mathify
Cette calculatrice est actuellement affichée en anglais pendant que sa traduction est en préparation.

Construction

Calculatrice vérifiée avec une formule transparente

Construction

Concrete Walkway Calculator.

Estimates the volume of concrete needed for a rectangular walkway based on length, width, and thickness.

Les résultats se mettent à jour en direct pendant que vous tapez.
ƒ

Vos entrées

Comment ça marche

  1. 1

    Measure the length and width of the walkway in feet.

  2. 2

    Measure the thickness in inches.

  3. 3

    Multiply length × width × thickness (converted to feet) to get cubic feet.

  4. 4

    Divide by 27 to convert to cubic yards.

(length * width * (thickness / 12)) / 27

Questions fréquentes

How do I convert thickness from inches to feet?

Divide the thickness in inches by 12. For example, 4 inches = 4/12 = 0.333 feet.

Why divide by 27?

There are 27 cubic feet in one cubic yard (3 ft × 3 ft × 3 ft). Concrete is usually ordered by the cubic yard.

Should I order extra concrete?

It's common to add 5-10% for waste, spillage, or uneven subgrade. This calculator gives the theoretical volume.

Explorer cette catégorie de calculatrices

ConstructionParcourir tout

Résultats

Formule vérifiée

Concrete Volume

0,741cubic yards

Demander n'importe quoi

Estimation à titre indicatif uniquement — vérifiez les décisions importantes avec un professionnel approprié.

Comment ça marche

Estimates the volume of concrete needed for a rectangular walkway based on length, width, and thickness.

  1. Measure the length and width of the walkway in feet.
  2. Measure the thickness in inches.
  3. Multiply length × width × thickness (converted to feet) to get cubic feet.
  4. Divide by 27 to convert to cubic yards.

Formules

Les mathématiques derrière cette calculatrice, écrites pour que vous puissiez vérifier le résultat.

Volume in cubic feet

V = L × W × (T / 12)

Multiply length and width (in feet) by thickness converted to feet.

Example:

Input: L=10 ft, W=3 ft, T=4 in

Calculation: 10 × 3 × (4/12) = 10 cubic feet

Result: 10 ft³

Convert to cubic yards

Y = V / 27

Divide the cubic feet volume by 27 to get cubic yards.

Example:

Input: V=10 ft³

Calculation: 10 / 27 ≈ 0.37

Result: 0.37 yd³

Cas d'utilisation réels

Où ce calcul apparaît dans la vie quotidienne.

Home walkway

Estimate concrete for a front or backyard path.

Example: 20 ft × 3 ft × 4 in ≈ 0.74 yd³

Garden path

Plan a narrow, decorative walkway.

Example: 15 ft × 2 ft × 3 in ≈ 0.28 yd³

Commercial sidewalk

Budget for a wider, thicker walkway.

Example: 50 ft × 5 ft × 6 in ≈ 4.63 yd³

Conseils et erreurs courantes

Tips

  • Measure in feet for length and width, and inches for thickness.
  • Round up to the nearest quarter yard when ordering.
  • Add 5-10% extra for waste and uneven ground.
  • Check local building codes for minimum thickness requirements.

Common Mistakes to Avoid

  • Forgetting to convert thickness from inches to feet.
  • Using square feet instead of cubic feet.
  • Not dividing by 27 to get cubic yards.

Hypothèses et limites

  • Use the stated inputs and units.
  • Results are estimates for planning and education.
  • Check measurements and source data before making an important decision.