Skip to content
Cette calculatrice est actuellement affichée en anglais pendant que sa traduction est en préparation.

Construction

Calculatrice vérifiée avec une formule transparente

Construction

Concrete Sidewalk Calculator.

Estimates the volume of concrete needed for a sidewalk and the number of 60-lb bags required.

Les résultats se mettent à jour en direct pendant que vous tapez.
ƒ

Vos entrées

Comment ça marche

  1. 1

    Measure the length and width of the sidewalk in feet.

  2. 2

    Measure the thickness in inches and convert to feet by dividing by 12.

  3. 3

    Multiply length × width × thickness (in feet) to get cubic feet.

  4. 4

    Divide the cubic feet by 0.45 to estimate the number of 60-lb bags, rounding up.

length * width * (thickness / 12)

Questions fréquentes

How much area does one 60-lb bag of concrete cover?

A 60-lb bag yields about 0.45 cubic feet, so at 4 inches thick it covers roughly 1.35 square feet.

Should I order extra concrete?

It's wise to add 5-10% for waste, spillage, or uneven subgrade. Adjust the length and width slightly or add a buffer when buying bags.

Can I use this calculator for a patio or driveway?

Yes, the same volume formula applies. Just adjust the thickness and dimensions accordingly.

Explorer cette catégorie de calculatrices

Résultats

Formule vérifiée

Concrete Volume

20cu ft

60-lb Bags Needed45bags

Estimation à titre indicatif uniquement — vérifiez les décisions importantes avec un professionnel approprié.

Comment ça marche

Estimates the volume of concrete needed for a sidewalk and the number of 60-lb bags required.

  1. Measure the length and width of the sidewalk in feet.
  2. Measure the thickness in inches and convert to feet by dividing by 12.
  3. Multiply length × width × thickness (in feet) to get cubic feet.
  4. Divide the cubic feet by 0.45 to estimate the number of 60-lb bags, rounding up.

Formules

Les mathématiques derrière cette calculatrice, écrites pour que vous puissiez vérifier le résultat.

Volume of a rectangular slab

V = L × W × T

Multiply length, width, and thickness (all in feet) to get cubic feet of concrete.

Example:

Input: L = 20 ft, W = 3 ft, T = 4 in (0.333 ft)

Calculation: 20 × 3 × 0.333 = 20 cu ft

Result: ≈ 20 cu ft

Bags from volume

Bags = V / 0.45

Each 60-lb bag yields about 0.45 cubic feet. Divide total volume by 0.45 and round up.

Example:

Input: V = 20 cu ft

Calculation: 20 / 0.45 = 44.44

Result: ≈ 45 bags

Cas d'utilisation réels

Où ce calcul apparaît dans la vie quotidienne.

Home sidewalk replacement

Estimate concrete needed for a standard 3-ft wide walkway.

Example: 20 ft long, 3 ft wide, 4 in thick → 20 cu ft

Garden path

Plan a narrow path with thinner concrete to save material.

Example: 30 ft long, 2 ft wide, 3 in thick → 15 cu ft

Contractor bidding

Quickly calculate material costs for multiple sidewalk sections.

Example: Sum volumes of each section

Conseils et erreurs courantes

Tips

  • Always measure in feet; convert inches to feet by dividing by 12.
  • Add 5-10% extra for waste and uneven ground.
  • For a stronger sidewalk, consider 5-6 inches thickness if vehicles will cross it.
  • Check local building codes for minimum thickness requirements.

Common Mistakes to Avoid

  • Forgetting to convert thickness from inches to feet.
  • Using the bag yield for 80-lb bags (0.6 cu ft) instead of 60-lb (0.45 cu ft).
  • Not rounding up the number of bags, leading to a shortage.

Hypothèses et limites

  • Use the stated inputs and units.
  • Results are estimates for planning and education.
  • Check measurements and source data before making an important decision.