Chemistry

Instant, private, and free

Resuspension Calculator.

Calculate resuspension volume from pellet mass and target concentration.

On-device calculationNo signup
01

Set your values

Results update as you type.

Resuspension volume: 10 volume

Resuspension volume

10.000000volume

Educational formula calculator. Keep units consistent and verify assumptions against your laboratory or course specification.

Use Cases

Preparing stock solutions

When you have a dry pellet (e.g., DNA, protein, or chemical) and need a specific concentration for your stock solution, this calculator tells you how much solvent to add.

Example: Pellet mass = 5 mg, target concentration = 2 mg/mL → resuspension volume = 2.5 mL

Diluting a concentrated pellet

If you have a pellet with a known mass and want to dilute it to a lower concentration, use this calculator to find the exact volume of solvent needed.

Example: Pellet mass = 10 mg, target concentration = 1 mg/mL → resuspension volume = 10 mL

Frequently Asked Questions

How do I use the resuspension calculator?
Enter the pellet mass (in mass units like mg or µg) and the target concentration (in mass/volume units like mg/mL or µg/µL). The calculator will compute the required resuspension volume in the corresponding volume unit (e.g., mL or µL).
What units can I use for pellet mass and target concentration?
The calculator accepts any mass unit for pellet mass (e.g., mg, µg) and any mass/volume unit for target concentration (e.g., mg/mL, µg/µL). Ensure the units are compatible so the result is meaningful.
Why is the resuspension volume important?
Resuspending a pellet in the correct volume ensures your solution has the desired concentration, which is critical for downstream applications like assays or experiments. This calculator helps you avoid manual calculation errors.

Tips & Common Mistakes

Tips

  • Always double-check your units: if pellet mass is in mg and target concentration is in µg/mL, convert to the same mass unit first.
  • Use a pipette with appropriate accuracy for the calculated volume to ensure precise resuspension.
  • After adding solvent, mix thoroughly (e.g., vortex or pipette up and down) to ensure complete resuspension.
  • For viscous solutions, allow extra time for the pellet to dissolve completely before measuring concentration.

Common Mistakes to Avoid

  • Forgetting to convert units between mass and concentration, leading to incorrect volume calculations.
  • Assuming the pellet is 100% pure; if purity is known, adjust the mass accordingly.
  • Not accounting for the volume of the pellet itself, which is usually negligible but can matter for very small volumes.

Last updated: August 13, 2026