Conversions
Verified calculator with a transparent formula
Rømer to Kelvin.
Converts a temperature from the Rømer scale to Kelvin.
Your inputs
How it works
- 1
Enter the temperature in Rømer degrees.
- 2
Subtract 7.5 from the Rømer value.
- 3
Multiply the result by 40/21.
- 4
Add 273.15 to get Kelvin.
(roemer - 7.5) * 40 / 21 + 273.15Frequently asked questions
What is the freezing point of water in Rømer?
7.5 °Rø, which converts to 273.15 K.
What is the boiling point of water in Rømer?
60 °Rø, which converts to 373.15 K.
Is the Rømer scale still used today?
No, it is mostly historical, but it is useful for understanding temperature scale conversions.
Explore this calculator category
Results
Formula checkedTemperature in Kelvin
0K
Estimate for general guidance only — verify important decisions with an appropriate professional.
How it works
Converts a temperature from the Rømer scale to Kelvin.
- Enter the temperature in Rømer degrees.
- Subtract 7.5 from the Rømer value.
- Multiply the result by 40/21.
- Add 273.15 to get Kelvin.
Formulas
The math behind this calculator, written out so you can verify the result.
Rømer to Kelvin
The Rømer scale sets freezing of water at 7.5 and boiling at 60. The conversion adjusts for the offset and scaling.
Example:
Input: °Rø = 0
Calculation: (0 − 7.5) × 40/21 + 273.15
Result: 258.86 K
Real-world use cases
Where this calculation shows up in everyday life.
Historical temperature records
Convert old temperature readings recorded in Rømer to modern Kelvin for scientific comparison.
Example: A 1700s record of 10 °Rø becomes 278.10 K.
Education
Teach temperature scale conversions and the relationships between different units.
Example: Show that 7.5 °Rø equals 273.15 K.
Cross-referencing data
When working with mixed historical and modern data, convert all values to a common scale.
Example: Convert a series of Rømer measurements to Kelvin for analysis.
Tips and common mistakes
Tips
- Remember that 0 °Rø is about 258.86 K, which is well below freezing.
- Use the formula directly for any Rømer value, including negative ones.
- Double-check your arithmetic when subtracting 7.5, as it is a common source of error.
Common Mistakes to Avoid
- Forgetting to subtract 7.5 before scaling.
- Using 273 instead of 273.15 for the Kelvin offset.
- Mixing up the order of operations: multiply before adding.
Assumptions and limitations
- Use the stated inputs and units.
- Results are estimates for planning and education.
- Check measurements and source data before making an important decision.